Call Station Basic

• Redundant network connection
• Power ‘ON’ indication
• Status/fault indications
• Indication that the priority level of destinations is higher than that of the pending announcement
• Supervision of microphone capsule
• Stylish and modern design

The call station basic can make manual or pre-recorded announcements to any pre-assigned zones. The call station basic has a microphone on a flexible stem, a pushto-talk button, a speaker, and a headset socket. The LBB 4430/00 can be extended with up to 16 keypads (LBB 4432/00 or LBB 4434/00), each with eight programmable keys. Extension with a numeric keypad (PRS‑CSNKP) is also possible.

Functions
The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility. A limiter and a speech filter improve intelligibility and prevent clipping of the audio. It has a volume control for the monitoring speaker and the headset. When it plays a chime or a pre-recorded message, the call station activates its speaker. When a headset is connected, it replaces the microphone and speaker. The call station has its own DSP, and converts between analog and digital audio. The audio processing can include sensitivity adjustment, limiting, and parametric equalization. Up to 16 call station keypads can connect to the station via a serial communication link. The station provides the power for the keypads. Up to 224 priorities can be assigned to the call station. All configuration can be done via the Praesideo network controller. The call station is fully supervised and supports fail-safe operation. Even if the Praesideo network controller fails, the call station is still able to put through emergency calls.

Controls and Indicators

• Three status LEDs
• Configurable PTT-key
• Volume control for loudspeaker/headset

Interconnections

• Two system network connections
• Serial data and power supply interface for call station keypads
• 3.5 mm jack for headset