• Suitable for speech and music reproduction
• Light weight ABS material
• Easy to install
• Optional back-box
• Unobtrusive design

The LC3‑UC06 is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3 and 1.5 Watt. The LC3‑UC06‑LZ is a low impedance (4 Ohm) version ceiling loudspeaker for direct connection to a low impedance amplifier output. The optional back‑box LC3‑CBB fully protects the loudspeaker from dust, falling objects and prevents sound traveling via the ceiling cavity to adjacent areas. The loudspeaker frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.

• Suitable for speech and music reproduction
• Light weight ABS material
• Easy to install
• Unobtrusive design
• EN 54‑24 certified

The LC3‑UC06E is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt. The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The loudspeaker frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.

• Excellent speech and music reproduction
• Two‑way system
• Attractive ABS housing
• Provisions for internal mounting of the optional line / loudspeaker supervision board
• EN 54‑24 certified

The Bosch LH1-UC30E Music Horn Loudspeaker features a two‑way system, resulting in an extended frequency range and high sensitivity which makes it ideal for high quality speech and music reproduction.

• Suitable for speech and music reproduction
• Flush-mounting in ceiling cavity
• Easy to install
• Simple power setting
• Unobtrusive in virtually all interiors

The LHM 0606/xx is a general purpose, 6 W, cost-effective ceiling loudspeaker. The /00 version is screw mounted and the /10 version is clamp mounted into the ceiling. An optional fire dome LBC 3080/01 is available.

• Overcome limitations of a single system controller
• Expand system span with up to 20 subsystems
• License for one subsystem to enable networking with the master controller
• Possibility of system-wide emergency calls from central EN 54-16 certified call stations to all subsystems
• Network-wide propagation of error and status messages

The PRA-LSPRA software license creates a PRAESENSA multi-system architecture with higher scalability in comparison to a single system. A system with master and subsystem controllers improves the overall performance by extending the number of devices and zones. A master system controller is a standard PRAESENSA system controller with an active PRA-LSPRA license per subsystem. The same amount of licenses is required for an optional redundant master controller. Subsystem controllers do not require licenses. With a master controller and a maximum of 20
subsystems, PRAESENSA can support 3000 devices and 10,000 zones.

• Complete DSP zone matrix mixer and loudspeaker processor
• 4 microphone/line, 3 music source, call station and emergency inputs
• 8 independent output zones, and “Amp Link” outputs
• Ethernet control and Windows PC GUI, and an iOS app for zone control via iPhone and iPad
• RS485 connection for call stations and wall control panels

The PLM‑8M8 PLENA matrix 8 Channel DSP Matrix Mixer is designed for maximum flexibility and reliability. It is the heart and soul of the PLENA matrix system. When combined with PLM‑8CS call stations, PLM‑WCP wall control panels and the PLM‑4Px2x amplifiers; it is suitable for almost any application that requires up to 8 zones of high fidelity speech and background music (BGM).
The audio quality is suitable for live music, background music, high demand speech environments and zone announcement applications. Some typical application include: Shopping centers, schools, restaurants, bars, nightclubs, cafes, gyms, recreational facilities, churches, warehouses, office buildings, regional airports, train stations, bus terminals, boardrooms, meeting rooms, conference facilities, small theme parks, museums, back of house performing arts centers and sports stadia.

• Interface to Praesideo basic amplifiers
• Up to 16 audio channels
• Redundant fiber optic network connection
• Control input and output connections
• Complete supervision

The PRS-16MCI is part of the Praesideo network and acts as an interface to the Praesideo basic amplifiers that do not provide network connectivity. The unit is intended for public address and emergency sound systems. The multichannel interface provides 16 configurable output channels (14 main outputs and two spare outputs). It provides the audio signals to the basic amplifiers and has full control over the amplifiers. It supervises itself and the connected basic amplifiers, and reports fault events to the Praesideo network controller. The unit should be mounted in a 19″-rack with the included mounting brackets.

• Fully supervised DC‑power supply with integrated fail-safe redundancy
• Unique single 12 V battery backup solution
• Integrated 6‑port Ethernet switch on RJ45 and SFP
• General purpose control inputs and outputs
• Backup lifeline for connected amplifiers

This compact device combines multiple support functions to power and serve other PRAESENSA system devices. It can be used in a centralized system, but it is an enabler for decentralized system topologies with several smaller racks or cabinets located across the premises, to reduce loudspeaker cabling costs significantly. It provides DC‑power supply to connected amplifiers and peripherals from the mains, with a standards compliant charger for a single 12 V backup battery, saving on installation and battery maintenance costs. The integrated 6‑port Ethernet switch, with glass fiber support, facilitates easy interconnection of decentralized clusters of devices. Configurable, supervised control inputs and voltage‑free control outputs are available as interface to external equipment. Its OMNEO interface for control and fault reporting also provides an analog audio backup lifeline for the connected amplifiers.

• Lavalier clip-on microphone with windscreen
• For use with the Belt-pack transmitters (MW1-LTXFx)

• The wireless belt-pack transmitter is part of the Bosch wireless microphone system. This system is designed
  for public address in houses of worship, restaurants, conference centers, hotels, shops and many other
  applications.

• Innovative mount system is included for quick, simple, and reliable installations
• Carefully engineered for outdoor environments (IP54), without compromising performance
• Long throw 8″ (203 mm) woofer housed in a fire rated ABS plastic enclosure for extended LF performance down to 50 Hz
• 90 W power handling provides for 110 dB maximum SPL (116 dB peak)

The LB20-PC60-8 from Bosch is a high-performance, two-way, full-range, 8″ (203 mm) surface mount speaker with excellent wide, uniform coverage, and outstanding performance. It is designed for background and foreground music, paging, and sound reinforcement, and it’s ideal for a wide variety of indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others. With unparalleled ease-of-installation, sturdy weather resistance, modern and delicate look, and its flexible mounting options, the LB20-PC60-8 is the perfect solution for a wide variety of surface mount applications. The LB20-PC60-8 includes the unique and innovative mounting system, from Bosch, making every installation quick, simple, and reliable. The mounting system allows for 90 degrees of rotation horizontally, and 45 degrees of rotation vertically, and it can be easily installed on walls and ceilings. The mounting system comes already assembled and ready to be used, ready to make any job easier.

• Sturdy hybrid network cable
• Dual plastic optical fibers (POF) and copper power conductors
• Low smoke/zero halogen (LSZH) sheet material
• Wide temperature range operation

The LBB4416/00 is a network cable with two plastic fibers for data communication and two copper cores for power supply. It is 100 meters long, and comes without network connectors. LBB4417/00 connectors are fitted after the cable has been cut to the required length